Shot Blast Wheel versus the Air Blast Nozzle

SHOT BLAST WHEEL

Gibson Abrasive Equipment Shot Blast Wheel Icon

 

 

 

 

 

 

 

Shot Blast wheels propel the abrasive by centrifugal force through a controlled blast pattern in a particular direction.

Abrasive Flow of 2,100 pounds per minute requires:

  • One Operator
  • (4) Blast Wheels @ 20 horsepower each
  • Compressed air consumption 5.0 SCFM
  • Compressor power 60 KW
  • 80 horsepower

Advantages:

  • Velocity of shot easily controlled through wheel speed.
  • High flow rate of abrasive will provide high production.
  • Economical – one 20 hp wheel can throw 525 lbs per minute equal to nearly seven 1/2” nozzles at direct pressure at 90 psi.
  • Does not require very much compressed air.
  • Low labor costs.
  • Higher production rates.
  • Complete coverage.

Disadvantages:

  • Can damage delicate or thin parts.
  • Not good for localized peening.
  • Greater abrasive consumption.
  • Can’t be used with aluminum oxide or glass bead.


AIR BLAST NOZZLE

Gibson Abrasive Equipement Air Blast  Nozzel Icon

 

 

 

 

 

Blast media is pressurized in a blast tank or suctioned and propelled through a nozzle or multiple nozzles.

Abrasive Flow of 2,100 pounds per minute requires:

  • (27) Operators
  • (27)  ½” Nozzles @ 90 PSI
  • Compressed air consumption 8,370 SCFM
  • Compressor power 1400 KW
  • 1,876 Horsepower

Advantages:

  • Great for localized peening or cleaning.
  • Typically does not damage delicate or thin parts using the right media.
  • Can be used with aluminum oxide & Glass Bead.

Disadvantages:

  • Requires a lot of compressed air.
  • High labor costs.
  • Smaller blast pattern.
  • Low production rates.
  • Low abrasive flow rates.

Discuss your project and processes with an application specialist at Gibson Abrasive Equipment:
888-867-1619
[email protected]
www.gibson-equipment.com